中文You are welcomed to contact us freely for any equipment demand, support and service: +971 508969937(UAE)
Watermelon String Mill
Watermelon String Mill
Watermelon stringmill is one of the milling tools in sidetracking operation. It is used for repairing casing, reaming and opening channels. It is usually used immediately after opening windows. The milling edge (working area) of the watermelon mill contacts the borehole wall, and the end of each edge is designed as a cone. When the window is being opened, the watermelon mill can lengthen the window from the top and remove the scaling and burrs left on the pipe wall during the initial cutting.
Tab.1 Watermelon string mill parameter
|
Borehole Dia. |
Screw Thread |
Working Area OD （mm/in） |
Working Area Length |
Totul Length |
P.N. |
|
139.7 (5-1/2) |
NC 26 |
112 (4-7/16) |
600 (23-5/8) |
1130 (44) |
XGMX112 |
|
139.7 (5-1/2) |
NC 26 |
116 (4-9/16) |
600 (23-5/8) |
1130 (44) |
XGMX116 |
|
139.7 (5-1/2) |
NC 26 |
118 (4-5/8) |
600 (23-5/8) |
1130 (44) |
XGMX118 |
|
139.7 (5-1/2) |
NC 31 |
120 (4-3/4) |
600 (23-5/8) |
1280 (50) |
XGMX120 |
|
146.0 (5-3/4) |
NC 31 |
124 (4-7/8) |
600 (23-5/8) |
1280 (50) |
XGMX124 |
|
168.3 (6-5/8) |
NC 31 |
142 (5-9/16) |
600 (23-5/8) |
1280 (50) |
XGMX142 |
|
177.8 (7) |
NC 31 |
151 (5-15/16) |
600 (23-5/8) |
1280 (50) |
XGMX151 |